RAID Levels - RAID 1 - RAID LEVEL 1: Mirroring & Duplexing (via Mowser)

RAID LEVEL 1: Mirroring & Duplexing

Click on the diagram to see Raid 1 in action

For Highest performance, the controller must be able to perform two concurrent separate Reads per mirrored pair or two duplicate Writes per mirrored pair.

RAID Level 1 requires a minimum of 2 drives to implement

Recommended Products

JetStor SAS 412iS
JetStor SAS 616iSD
JetStor SAS 724S

Featured Product

JetStor SAS 712S

[image]

Characteristics & Advantages

One Write or two Reads possible per mirrored pair Twice the Read transaction rate of single disks, same Write transaction rate as single disks 100% redundancy of data means no rebuild is necessary in case of a disk failure, just a copy to the replacement disk Transfer rate per block is equal to that of a single disk Under certain circumstances, RAID 1 can sustain multiple simultaneous drive failures Simplest RAID storage subsystem design

Disadvantages

Highest disk overhead of all RAID types (100%) - inefficient Typically the RAID function is done by system software, loading the CPU/Server and possibly degrading throughput at high activity levels. Hardware implementation is strongly recommended May not support hot swap of failed disk when implemented in "software"

Recommended Applications

Accounting Payroll Financial Any application requiring very high availability

database, email, and/or web server

CCTV AND DIGITAL VIDEO RECORDING / SURVEILLANCE

You are viewing a mobilized version of this site...
View original page here